TOPTEK PA-80U 430-470 MHZ 80W POWER AMPLIFIER
TOPTEK PA-80U 430-470 MHZ 80W POWER AMPLIFIER
PA-80U UHF Power Amplifiers are efficient and wideband capable for FM, SSB, CW and Digital modes of operation. They offer a nominal output of 80 watts output with 3 to 5 watts input drive on any frequency from 430 to 470 MHz.
An attractive and useful front panel and heatsink chassis gives these amps everything they need for commercial and Amateur VHF operations.
Specification
Front panel power and SWR metering
Automatic Fault for high SWR over 2:1
Built-in low-noise receive preamplifier, nominal 20 dB gain
RF sense keying (no PTT connector)
Mode switch for automatic SSB delay and peak power metering
Settable power output: 4 steps from 30W to over 80W limit
Maximum 5W input, 80W output – Amp off maximum bypass 50W.
Type N female connectors - RF input and output
Permanently attached 24 in. (60cm) DC power cable, unterminated (tinned leads)
DC Input: 13.8 Vdc @ 13A maximum at full output 80W (10.5 to 14.8 Vdc operational range)
Dimensions: W-125 x H-50 x D-210mm
Weight: 1.15 kg
PA-80U UHF Power Amplifiers are efficient and wideband capable for FM, SSB, CW and Digital modes of operation. They offer a nominal output of 80 watts output with 3 to 5 watts input drive on any frequency from 430 to 470 MHz.
An attractive and useful front panel and heatsink chassis gives these amps everything they need for commercial and Amateur VHF operations.
Specification
Front panel power and SWR metering
Automatic Fault for high SWR over 2:1
Built-in low-noise receive preamplifier, nominal 20 dB gain
RF sense keying (no PTT connector)
Mode switch for automatic SSB delay and peak power metering
Settable power output: 4 steps from 30W to over 80W limit
Maximum 5W input, 80W output – Amp off maximum bypass 50W.
Type N female connectors - RF input and output
Permanently attached 24 in. (60cm) DC power cable, unterminated (tinned leads)
DC Input: 13.8 Vdc @ 13A maximum at full output 80W (10.5 to 14.8 Vdc operational range)
Dimensions: W-125 x H-50 x D-210mm
Weight: 1.15 kg
kfF0tcl
Product Code
5.0 kg
weight
New
Product Condition
0
Units in Stock
Updating Order Details
Please do not refresh or navigate away from the page!
Details
Reviews
Featured Products
DIAMOND A430S15R 70CM 1..
£64.99
DIAMOND A430S15R 70CM 15 ELEMENT YAGI This antenna has high gain for small size, easy to install and...
Diamond MX-72H
£42.00
DIAMOND MX-72H - DUPLEXER (HF) (144/430MHZ) A duplexer by Diamond, with 2 x 12" leads terminated with...
DIAMOND X-510N DUAL BAN..
£129.99
DIAMOND X-510N DUAL BAND VERTICAL (N-TYPE) This model is made of fibre glass construction, pre-tuned...
icom ic 7610
£3,588.00
ABOUT ICOM IC-7610 HF/50MHZ SDR TRANSCEIVER Following on from the technology incorporated into the IC-7300,...
ICOM IC-905 - VHF/UHF/S..
£3,344.99
ICOM IC-905 - VHF/UHF/SHF ALL MODE TRANSCEIVER PRICE TBA The industry first VHF/UHF/SHF all mode transceiver...
ICOM MB-116 RACK MOUNT ..
£68.00
ICOM MB-116 RACK MOUNT HANDLES Icom MB-116 Painted die-cast Handles for IC-7200 to protect buttons and...
MDHF 20mtr BAND DIPOLE ..
£33.00
MDHF MONO BAND DIPOLE ANTENNA A dedicated centre fed dipole for the 20mtr band - used with an internal...
PL259 STANDARD GOLD PLA..
£1.25
PL259 STANDARD GOLD PLATED PLUG (9MM) (FOR RG213) Gold plated brass PL259 9mm plug with gold plated centre...
PL259 STANDARD PLUG (7MM
£0.75
PL259 STANDARD PLUG (7MM) (FOR MINI-8) PL259 7mm plug for RG MINI8 or similar size cable
QUICK BLOW FUSES 32MM (..
£1.00
Quick Blow glass fuses as fitted in power leads. Supplied as a pack of 10 fuses. These are 32mm long...
XIEGU G106 - 5W PORTABL..
£340.00
XIEGU G106 - 5W PORTABLE QRP TRANSCEIVER 80-10M G106 is a 5W portable QRP model with SDR circuit structure...
YG27-35 DUAL BAND HI SP..
£75.00
YG27-35 DUAL BAND HI SPEC 2/70CM YAGI ANTENNA This is a great professional built dual band Yagi only...












